To watch satellite TV channels, you need a special device - a receiver, which allows you to receive a signal from the satellite and transmit it to your TV. To access certain channels, you must enter their codes.
It is necessary
- - television;
- - receiver.
Instructions
Step 1
Determine the manufacturer and brand of the receiver to enter the channel keys. If you have a Hivision / APEX D-box receiver, follow these steps to enter the keys into the receiver.
Step 2
Enter the emulator, for this go to the menu, then set the "Config" tab. Press buttons from 1 to 4 in sequence. Wait for the emulator menu to appear. Highlight Biss, press OK. If the screen displays No data found, it means that the emulator is empty and there are no keys in it.
Step 3
Press the red button on the remote. For example, you need to enter the key for the Megasport channel, the Amos satellite. These keys can be given in different versions depending on the types of tuners. Insert the first four digits of the key into the Biss field, this is the provider's number. A list of all numbers can be found at
Step 4
Find the numbers that are in the middle of the key, leave dashes in BIss instead. Do not enter them. Further, in the space for the key on the tuner, there are eight pairs of numbers, and in your code there are six pairs. Therefore, enter all the available numbers and add two zeros after them. After that press the red button to add the keys to the receiver. Click Exit, click OK to save the keys. Exit the menu. The keys with the Biss encoding on other receivers are entered in the same way.
Step 5
Add Biss coding to the receiver to enter the keys into the tuner. To do this, enter the code 9339 from the remote control, go to the "Editor" submenu, enter the encoding menu. Click the green button to add a key. Fill in the fields: Caid - enter 2600; in the “Channel ID” field, enter the channel code; in the "Frequency" field, enter the transponder frequency. The key itself must be entered in the "Key data" field. To do this, use the up / down buttons or enter letters with the numeric buttons on the remote. Save the key. To do this, click "OK", then Exit.
