Satellite receiver is a special decoder that allows you to view satellite TV programs. It must be selected according to the capabilities of your antenna. There are receivers for open channels, with emulators and with the ability to insert cards.
It is necessary
- - television;
- - satellite antenna;
- - receiver.
Instructions
Step 1
Make sure that your receiver has a special program - an emulator. It can store the keys to the encrypted channels that interest you. The keys in the program are collected in certain encodings, their list reaches a dozen. The mechanism for entering the emulator is different for different tuner models.
Step 2
Activate the emulator of the receiver to be able to enter the keys. For example, to perform this action in the Golden Interstar receiver. To do this, press the "Menu" button on the receiver's remote control, then sequentially dial the numbers 2, 5, 8, 0.
Step 3
To enter the code entry menu, click on the Menu button, then press the red button on the remote. To reset all existing ones and enter channel keys, press 0 on the remote. Go to the emulator, then click the blue button. Next, enter the keys.
Step 4
Activate the emulator in the Digital 4000 receiver. To do this, turn on any channel, press the 9339 combination of numbers from the remote control. If it didn't work, use the combination 9976.
Step 5
Log into the emulator to enter the keys into the Topfield receiver. To do this, enter the menu, select the "System Information" item, then dial 121 from the remote control. On other firmware, there may be combinations 231 or 321.
Step 6
Activate the emulator for the PowerSky receiver to be able to enter the keys. Please note that the name of the software for the tuner must contain a $ sign, then the emulator is present in it. Next, proceed with activation. To do this, press the "Menu" button.
Step 7
Sequentially dial a number of numbers 19370, in the frame that appears on the screen, enter 2486. Select the "Games" item, which contains the emulator. Next, go to entering the channel keys.
Step 8
You can activate the emulator for the Euston STV 2005 receiver by going to any menu heading and pressing the 7799 buttons on the remote. Then a menu will open containing a set of keys and a choice of encodings. To add Biss keys, use the Guide button on the receiver's remote control.
