A satellite receiver is a decoder that allows you to view satellite TV programs. It is usually chosen based on the capabilities of the antenna. A receiver with an emulator allows you to enter keys to open closed channels.
Necessary
- - television;
- - satellite antenna;
- - receiver.
Instructions
Step 1
Enter the keys into the x-7xx series Openbox receiver. To get started, enter the emulator using the "Menu" button, then enter the numbers 8282 from the keyboard. In the "Master pin-code" field, dial 1407. Next, press "Menu" again and enter 8282 from the remote control, select the slot with the required provider, select "Turn on".
Step 2
Add a provider slot if needed. To do this, after dialing the numbers 8282, press the green button, select Const CW, press "OK". Next, insert the 16-byte provider number, dividing it into two parts. Click on the "Channel" field and select the one you want to link. Exit using the Exit button, in the Save window click Yes. Then you can watch the selected channel.
Step 3
Enter the channel keys into the Openbox x-300 receiver. To do this, press "Menu", then dial the numbers 1117 from the remote control, enter the Key Edit item, then find the encoding and identifier. Edit the key, confirm the changes and exit the menu.
Step 4
Divide the key in half, remove the fourth and eighth pair of numbers from each part, go to a closed channel. Enter the first part of the code first, confirm and exit, if it does not work - do the same with the second part to enter the channel code into the receiver.
Step 5
Add channel keys to the Golden Interstar receiver. To do this, you need to enable the emulator. Press the "Menu" button on the receiver's remote control, then enter the digits 2580 in sequence. To enter the code entry menu, press Menu, then the red button on the remote control, to reset the keys, press "O". Go to the emulator, press the blue button. Enter codes. Save changes and exit the menu.
Step 6
Enter the keys in the Strong SRT 6155 receiver. To do this, go to "Menu" - "Installation" - "OK". Next, enter the pin code 0000. Go to the "System Settings" and "System Information". Enter 4225, press the volume button, press the white button, then the red one.
Step 7
Dial 0017DE, then click OK. In the left column, select a new provider, click the white button and enter the key in the field, replacing the zeros with the values you need. After you have finished entering the keys, click "OK" and save the changes.
