How To Enter The Key Into The Tuner

Table of contents:

How To Enter The Key Into The Tuner
How To Enter The Key Into The Tuner

Video: How To Enter The Key Into The Tuner

Video: How To Enter The Key Into The Tuner
Video: Tuner Pedal Basics 2024, December
Anonim

The owners of satellite dishes sometimes have situations in which television cannot be accessed. This may be due to the fact that the subscriber does not know how to enter a special key into the tuner. The key is usually issued when connecting channels.

How to enter the key into the tuner
How to enter the key into the tuner

Necessary

  • - TV and remote control;
  • - satellite antenna;
  • - tuner.

Instructions

Step 1

Initially turn on your emulator and activate it. To do this, open the "Menu" item and enter the combination "19370" there, then type "2486" in the box that appears. Next, open the "Games" item, which contains the emulator. If the system does not open, completely restart the software and start typing again. There are two ways to enter keys.

Step 2

If the emulator is separated from the rest of the system, press the "0" button on the remote control with the tuner and TV turned on. There can be two results of this action: the appearance of a sign on the TV screen, which indicates the types of encodings, lists of possible keys and the names of the providers themselves; graphs of received signal strength and quality may also appear. The first case will show you the presence of an emulator in the firmware and its performance. The second will let you know that there is nowhere to enter data.

Step 3

Select the desired type of encoding by pressing the left and right arrows on the remote control. To get to the line of the provider, press the down key. When the cursor is on the provider you need, click "ok". A table will appear in front of you. Edit it according to the prompts below the table and save by pressing the red button on the remote control.

Step 4

Use the second method if the BISS emulator is integrated with the entire system. - select the channel for which you will enter the key; - open the full screen mode for editing; - press the "0" button, then enter the password "0000"; - when the emulator menu appears, open the keys page by using the right or left arrows. Enter your key in the line that will be displayed in a different color from the rest; - follow the same steps to activate all the channels you need.

Recommended: