You will not surprise anyone with the presence of several televisions in the house now - this has long been the norm. But when purchasing another TV, it will not be superfluous to think about how to connect it to an existing antenna.
Instructions
Step 1
There are special devices for dividing a television signal, which can be found on sale under the name "splitters", "splitters", "dividers" or "crabs". With their help, you can connect up to 6 television receivers to one antenna. The signal quality will be equally good on every TV, provided that you are not using the cheapest splitter.
Step 2
The splitter is installed, as a rule, at the entrance of the television cable to the house, after which a cable is laid from it to each television. Complete with connectors for connection. The installation of splitter connectors is no different from the installation of a conventional coaxial connector, which ends with any television antenna.
Step 3
To carry out the installation of the connectors, you will need minimal skills in working with a television cable, the presence of side cutters and a painting knife. First you need to clean the cable from the top layer of insulation without damaging the shielded braid, then move the braid and clean the center core. After that, you can put on the connector and connect it to the splitter. It is important not to allow the shielded braid and the central core of the television cable to come into contact with each other.
