The possibilities of modern TV tuners are practically unlimited. They can be used to transmit various signals to multiple devices at once. It is very important to choose the right TV tuner in order to accomplish the tasks.
Instructions
Step 1
When choosing a TV tuner, you need to pay attention to several aspects. If you want to use this device in conjunction with modern LCD or plasma TVs, then pay attention to the maximum resolution supported by the tuner. Check if digital data links are available, if required.
Step 2
A splitter can be used to connect to one TV tuner. Unfortunately, connecting this device almost always negatively affects the image quality. Select a TV tuner with multiple video output channels. These ports can be S-Video, VGA, DVI and even HDMI. Be sure to check the possibility of connecting two TVs at once to this TV tuner model.
Step 3
Connect the selected TV tuner to AC power and connect it to your computer. Usually the USB port is used for this. Connect the antenna cable to the corresponding jack on the tuner. Install the software that came with your device. Run the program and configure the settings for the TV tuner.
Step 4
Now connect the tuner to your TVs. To do this, you will have to use different channels. If the selected device has two digital outputs (DVI and HDMI), then use them. This will keep the image quality high.
Step 5
Turn on both TVs. Open the settings menu for each of them and go to the "Signal source" item. Specify the connector to which you connected the TV tuner. Connect the audio cable to the corresponding ports on the TVs. Please note that most of these tuners can be used in conjunction with computer monitors. Remember that the TV tuner must be permanently connected to the AC mains.
