How To Connect Two TVs To A Satellite Dish

Table of contents:

How To Connect Two TVs To A Satellite Dish
How To Connect Two TVs To A Satellite Dish

Video: How To Connect Two TVs To A Satellite Dish

Video: How To Connect Two TVs To A Satellite Dish
Video: How to connect Multiple satellite to One receiver 2024, December
Anonim

The world has stepped along the path of progress far enough. Earlier, just a few decades ago, you could only dream of a TV. Today it is possible to purchase several TV sets for one family. Each TV has certain characteristics for receiving channels for broadcasting. A satellite dish allows receiving more and more channels. You can independently choose the channel package, broadcast conditions, connection satellite for the antenna. In addition, today it is possible to immediately connect two TVs to one satellite dish. You can make such a connection yourself if you have some fairly simple skills in working with electronics.

How to connect two TVs to a satellite dish
How to connect two TVs to a satellite dish

It is necessary

Satellite antenna (dish), Ku-band converter, receiver, cable and choice of the dish mounting location, primary skills in working with electronics

Instructions

Step 1

When deciding to connect two TVs to one satellite dish, it is worth deciding on a channel package. One of the options is TRICOLOR. It broadcasts from the Eutelsat W4 satellite in good transmission. The satellite dish can be 60 cm in diameter, offset type. The antenna is placed vertically on it. This allows good signal reception.

Step 2

Range converter and receiver are used for signal conversion. It goes from a higher frequency to a lower frequency. When deciding to view encrypted channels, it will be necessary to install additional equipment - a decoder. The receiver connects directly to the TV via the antenna input.

Step 3

When choosing a cable, special attention should be paid to its quality. Not worth saving. The amount of lost data depends on the high quality of the signal. It is worth taking into account the broadcast on two TVs at once. It can be routed from one or two connectors.

Step 4

Two tuners are installed on the antenna. The option of connecting the heads on the antenna is possible. To it you need to connect a so-called double to separate the signal through the "Switch". He usually has one antenna input and two TV outputs.

Step 5

After carrying out all the operations, you can tune the satellite Internet through the antenna. Its speed is much faster than usual.

Recommended: