A modern person cannot imagine his life without the Internet. But the speed of access does not always allow you to do everything you need efficiently. At the same time, work in a local network is always much faster. How can you set it up on the Corbin?
Instructions
Step 1
Configure the local network for the "Corbina" provider. If your operating system is Windows Vista, go to "Control Panel", select "Network and Sharing Center". Click on "Manage Network Connections".
Step 2
Next, open the context menu on the "Local Area Connection" shortcut, then select "Properties". Uncheck the box next to Internet Protocol Version 6. Check the box TCP / Ipv4, click on the "Properties" button. In the protocol configuration window that opens, select "Obtain an IP address automatically", in the DNS field there is a similar item. Then click OK and Close.
Step 3
Configure the local network "Corbina" in the Windows XP operating system. Right-click on the "Network Neighborhood" shortcut, select "Properties". Then call the properties of the local area connection.
Step 4
In the configuration window that opens, select the TCP / IP protocol, click on the "Properties" button. Check the corresponding boxes to automatically obtain the IP address and DNS server address in the same way as in the previous paragraph. Then click "OK" and "OK" again.
Step 5
Configure the LAN for Corbina in Mac OS Tiger. To do this, go to Finder, select Programs, then System Preferences. Go to the "Internet and Network" menu, select "Network". For Location, select Automatic.
Step 6
Then, in the "Show" field, enter "Network Status". Select “Built-in Ethernet” from the dropdown list, then go to the TCP / IP tab. In the "Ipv4 Configuration" item, specify the DHCP server, then click on the "Apply" button. Go to the Ethernet tab and the “Identifier” field will contain the MAC address of your network card, which will need to be reported to the provider for connection.
