Currently, the use of audio systems with color music in cars has become quite popular. Moreover, a high-quality installation of color music is quite expensive, which is why many motorists often decide to do it themselves. Color music is used both in the speakers themselves in the car, and is mounted separately in the car interior.
Necessary
- - a piece of plastic;
- - scissors;
- - drill;
- - sandpaper;
- - LED bulbs (12 volt);
- - glue;
- - thermal gun
Instructions
Step 1
In order to make a color music, you must first make a box structure. To do this, we take an ordinary piece of plastic and cut out 4 plates about 20x10 cm in size from it, as well as 2 small plates with a 5x5 cm square. However, you can always make a box with your own dimensions, just keep in mind that you have to adjust the corners.
The most important thing when cutting out these plates is to try not to leave any snags on the plastic with the scissors. Also, try to cut all the plates as evenly as possible so that they can easily stick together in the future. Any curvature or slight skewness in cut samples can have a very bad effect on the quality of your box.
Step 2
Then, in one of the 4 cut-out plates, which will be intended for the back wall of the color music box, you need to drill 2 holes. Through one of these holes it will be possible to pass the wire from the headphones, and the second is intended for installing equipment for powering our product. Thus, after you drill the holes in the box and glue its parts together, half of the work on how to make the color music is already ready.
Step 3
In addition, if you want to get a more beautiful appearance and a variety of different effects in color music, you need to "darken" the walls of the box beforehand.
In order for our case to become matte, it is necessary to take a small sandpaper and with slow circular movements process all the panels of the made box.
Step 4
Then, in the same way, special LED lenses are processed, which we need to reproduce color aurora in the structure.
After your system with lenses and bulbs is ready, you can start assembling the box body, the walls of which are connected with a glue gun.
Step 5
For your color music to work well, you need to choose the right batch of LEDs, which are now sold in huge quantities in stores. You need to buy special 12 volt products that have the highest brightness when glowing. We do not recommend using more powerful LEDs and lamps in our assembled circuit.
Step 6
After you assemble the circuit, you need to check it for operability by plugging the product into a power outlet. If the circuit works fine, then you just need to fix the power plug on the inside of the box, and install the top plate on the box. It turned out to be not at all difficult to make color music in this way.
