There are several ways to connect multiple TVs to one cable. Their implementation depends on what type of signal reception you are using. At the moment, the most common signals are satellite and cable.
It is necessary
Sharp knife, pliers, adapters
Instructions
Step 1
To connect multiple TVs to your cable TV, there are a few steps you need to take. First, you need to purchase a splitter - this is a device whose task is to distribute a signal to several outputs. Resembles a tee for sockets, only for coaxial cable.
Step 2
Using tools, we connect the main cable to the tee, and then the cable from the TVs to the splitter. All inputs must be well clamped with pliers, since the signal quality depends on this. After the work done, we receive a signal on all TVs, while on each of them you can watch different channels at the same time.
Step 3
The second method belongs to connecting televisions to satellite television. Everything is much more complicated here than in a cable signal. Basically, you will need to determine how the receiver is connected to your TV. At the moment, there are different types of connectors for connection. The most popular ports are VGA, DVI and HDMI. They are all different and you will not be able to connect a VGA cable to the HDMI port directly.
Step 4
You may need to buy adapters to connect, because the splitters that you need exist only with VGA and DVI ports. It should be noted that the use of adapters significantly reduces the quality of picture and sound transmission.
Step 5
To carry out this operation from the tools, you will need the same knife and pliers. Also, when two or more TVs are connected to one satellite TV cable, all TVs will show the same channel.
Step 6
The best way in this case is to order a special receiver that will provide different channels to all connected TVs.
