Unfortunately, not always a usb modem can please its owner with the quality and speed of the Internet connection. When the connection is constantly interrupted or Internet pages are loaded at the speed of a crawling snail, the question arises: "How to improve the reception of a usb modem?"
It is necessary
- - usb extension cable;
- - antenna;
- - internet signal booster.
Instructions
Step 1
Connect the USB modem to an extension cord and try to find a place where the signal level will be higher. In an apartment, such a place is usually located closer to the ceiling or near a window. Find out in advance in which direction the base station is located, in its direction and you should direct the usb modem. The USB cable should be no more than two meters, otherwise, with a good signal level, the connection may start to be interrupted periodically.
Step 2
You can improve the reception of your USB modem by using different types of antennas. There is a lot of information on the Internet on how to make an antenna for a usb modem yourself from scrap materials. At home, the antenna can be built from ordinary copper wire. To do this, wrap the usb-modem with a wire with several turns (from three to eight) at the level of the SIM card, leave the end of the wire 15-20 cm in size and point it up.
Step 3
With Connect or Connect 2.0 internet signal boosters, you can significantly increase the signal level of your USB modem and ensure its stable operation. Amplifiers are produced by the Saratov Electromechanical Plant "REMO" - https://connect.remo-zavod.ru/ Testing has shown that thanks to the use of the amplifier, the download speed increases 3-4 times
Step 4
If the design of the USB modem provides an antenna input, then to maximize the speed of the mobile Internet, purchase a cable, antenna adapter and an external antenna from a specialized store. After connecting all the elements, install the antenna on the roof of the house and point it towards the base station.
Step 5
The download speed does not always depend on the signal quality. It happens that even at full signal level, the speed leaves much to be desired. This happens if there are speed limits provided for by the tariff plan. In this case, changing the tariff plan will help solve this problem.
Step 6
A decrease in speed can occur after exceeding a certain amount of traffic on unlimited tariff plans. After a while, it will recover without your efforts, but for the future, try to comply with the terms of the contract and not exceed the available limit per day.
