You can only disassemble a Nokia headset if you know how to do it correctly, otherwise you can harm your mobile phone. Of course, sometimes it is not necessary to disassemble the entire headset, but only some of it, which also requires certain skills.
Necessary
- - Nokia headset;
- - sharpened plastic card;
- - thin Phillips screwdriver;
- - tweezers.
Instructions
Step 1
Solder the headphones from another headset, or you can do the same with the connector on the wire. This option is suitable when the sound in the headphones disappears or is not heard at all. Most likely, with such a problem, there is a hidden wire break.
Step 2
To make a connector, you need to disassemble the headset. First, prepare all the tools you need for disassembly. Then take a very finely sharpened plastic card and gently pry off the panel under the button. Click the button next to it. It will not be difficult to do this, since these parts are glued to double-sided tape.
Step 3
Next, use a Phillips screwdriver to unscrew the two screws and disassemble the headset case. Since the screws are very small, put them in a safe place right away to avoid losing them. Then pull out the inner board carefully so as not to damage any of the connections. After removing the board, warm up the soldering iron and unsolder the broken headphones that you want to replace with new ones. Use a pair of tweezers to remove the old earphone wires and remove.
Step 4
After replacing the earbuds, reassemble the headset body. First, carefully insert the removed internal board into the case, then screw all the screws back and replace the button by snapping the socket into place.
