How To Connect An Additional Panasonic Handset

Table of contents:

How To Connect An Additional Panasonic Handset
How To Connect An Additional Panasonic Handset

Video: How To Connect An Additional Panasonic Handset

Video: How To Connect An Additional Panasonic Handset
Video: Panasonic DECT Phone Pairing, How to Video. (Register Handset) 2024, May
Anonim

Landline cordless phones are easy to use, you no longer have to worry about a telephone cord that does not reach the right places in the room or kitchen. This is especially true for large rooms in which several handsets can be connected to the telephone base.

How to connect an additional Panasonic handset
How to connect an additional Panasonic handset

It is necessary

  • - Panasonic radiotelephone;
  • - additional tube.

Instructions

Step 1

Take the instructions for the phone and determine if the additional handset is suitable for connecting to the base of this model. You can register up to six handsets to one unit. Please note that using other models not listed in the instructions may result in some operations not being performed (unit and tube settings).

Step 2

For example, you can talk with an additional handset on the intercom with another handset, while the third handset is making an outside call. Use additional base units, up to four of them can be installed to expand the range of your phone. Please note that if the handset leaves the range of the base to which it is connected, then another base will be searched for, and the conversation that was ongoing at that time will be interrupted.

Step 3

Press the button in the center of the joystick, the handset icon will appear on the screen, press "OK". Then use the "Up" and "Down" buttons to select the "Registration" item, click "OK". Likewise, mark the item "Register handset" - "OK". Then select the base unit number for which you want to register the handset, press "OK".

Step 4

Press the hands-free button for five seconds on the base unit until you hear the registration tone. If all available handsets ring, stop registration and repeat this step.

Step 5

Wait until the display shows the command Pin base, enter the pin code of the base unit of the phone, by default it is 0000 and press "OK". If you do not remember your PIN code, then you need to contact a Panasonic service center. If the registration of the additional handset is successful, the network icon will stop flashing on the screen, and if the phone has key tones, a tone will sound confirming the successful connection of the additional handset.

Recommended: