Nokia phone models are of sufficient quality in all respects. However, sometimes they also need repairs. You don't always have to go to a workshop to get your Nokia 5310 repaired. You can do the job yourself. But for this you need to disassemble the phone.
Necessary
small flat screwdriver
Instructions
Step 1
Remove all items, if any (headset, headphones, key fob, etc.). After that, remove the back cover to get out the battery, SIM card and memory card. This is to ensure the safety of these items during the disassembly process.
Step 2
Remove the overlay that is around the built-in camera. Then insert a screwdriver or special tool (if you have one) into the gap that has formed between the body and the pad around the camera, and begin to gently trace around the entire perimeter to release it from the fasteners. Under the top panel, you will find two small screws, which must also be removed.
Step 3
Turn the phone over with the monitor facing you and remove the cover on which the buttons are located. To do this, also insert a screwdriver into the gap between the case and this pad and, guided by the previous principle of operation, sweep around the entire perimeter. When you remove the trim, you will be able to see two more screws. Unscrew them as well.
Step 4
Disconnect the keyboard from the phone. To do this, pull on it using a little effort. Under it, you will find two more screws that also need to be unscrewed.
Step 5
Separate the board from the phone case without any handy items. On the back of the board, you will find two metal mounts on the sides. Open them with a screwdriver. After that, disconnect the connector located in the lower left of the matrix. It is brown in color and has an "L" -shaped shape.
Step 6
Turn the board over and disconnect the connector from the screen matrix using a screwdriver, and then detach the LCD matrix along with the frame from the motherboard. Then remove the die from the frame.
