If you decide to save money or try your hand, I advise you to read this manual first in order to remove the back cover from your iPhone yourself.
Necessary
Phillips screwdriver, suction cup
Instructions
Step 1
The first step is to remove the SIM card tray. If you start disassembling the iPhone without sticking it out, then you can easily bend the internal parts, which will affect the assembly and, as a result, there will be cracks. Or it may happen that the phone stops working altogether.
Step 2
Next, unscrew the two screws that are located near the exit to the dock connector. You will need a small Phillips screwdriver for this.
Step 3
We attach the suction cup to the screen and pull it towards ourselves. The screen is disconnected. If you raise it sharply, then you can break the trains, which will lead to the failure of the iPhone.
Step 4
When you lift the screen, you will see numbers in orange circles. It is in this order according to these numbers that you will disassemble the phone.
Step 5
We take tweezers and carefully lift the cables that hold the screen and touchscreen. They are marked with numbers - two and three.
Step 6
Next, use a Phillips screwdriver to unscrew all 8 screws that hold the metal plate. It is better to put all the screws in one place, otherwise they can be easily lost.
Step 7
Next, remove the three loops, which are marked under the numbers - four and five. Under the number six, gently lift the train-fight.
Step 8
Trying not to touch the microcircuits, remove the metal plate.
Step 9
Remove the battery very carefully from the cover. I advise you to purchase a very thin double-sided tape in advance for assembly in the reverse order.
Step 10
When removing the vibro trail, it is best to use tweezers.
Step 11
Next, take out all the remaining parts and screws.
Step 12
Finally, all that remains is to remove the display. To do this, unscrew the 6 screws and the trick is in the bag.
So you disassembled the iPhone, and got to the cover, which we can now change.
