When columns get old, they need to be replaced with new ones. The sound gradually begins to turn into a sharp sound or crackling, which brings some inconvenience when listening to a particular music track. You can make a simple speaker case at home.
It is necessary
Columns, metal fine mesh, glue, a set of tools, scissors, acrylic, organic glass, compasses, pencil, sandpaper, fan, disc box
Instructions
Step 1
The first step is to disassemble the speaker design.
Step 2
Make the speaker wire disconnect from the board using connectors.
Step 3
Use templates that you can use to cut out acrylic pieces. To do this, use a compass and a handle so that the future body has right angles.
Step 4
Grind the finished walls.
Step 5
Sand the plexiglass with sandpaper.
Step 6
Cut out a hole for the speakers.
Step 7
If you decide to work additionally with the fan, then for it you will need a mesh cut to the size of the case wall, as well as screws. Secure the mesh with screws.
Step 8
Use the disc box to make the fan grill. Cut out its outlines and grind with sandpaper.
Step 9
Also cut out two speaker grilles for the front of the speakers. To do this, you will again need a box from the disc.
Step 10
Glue the mesh and grate together to create the front panel of the cabinet.
Step 11
In the base, make holes for wires and LEDs (4 pieces).
Step 12
Glue all the parts for the case, having returned all the internal contents of the speakers in advance.
