Epson is a well-known brand of printers. These printers are easy to maintain, easy to disassemble and repair. However, do not use force when opening the device, otherwise parts may be damaged. If problems arise, it is advisable to change the vector of motion, but not to increase the force effect. For disassembly, you must use a special screwdriver and knife.
It is necessary
Phillips screwdriver with long handguard, knife
Instructions
Step 1
We remove the paper tray without touching the cover, as it does not interfere with the disassembly process in any way. At the same time, we press the latch with the finger of one hand, with the other hand we pull the tray in the opposite direction.
Step 2
To remove the false panels, unscrew the screws, press on the sides until the plastic bends slightly. In parallel with this, we move the panel. We repeat the manipulations with the second panel.
Step 3
Detach the USB frame by pulling it up. We unscrew the screws in the shaft under the frame and under the bezel panels. Remove the printer cover by releasing the latches. We unscrew the next batch of screws that appeared under the body.
Step 4
We remove the "diaper" CISS. To do this, unscrew the screws, remove the metal frame and the front panel. We detach the loops. We take out the continuous ink supply unit.
