How To Flash A Chinese Phone Nokia N95

Table of contents:

How To Flash A Chinese Phone Nokia N95
How To Flash A Chinese Phone Nokia N95

Video: How To Flash A Chinese Phone Nokia N95

Video: How To Flash A Chinese Phone Nokia N95
Video: 100 Попыток сделать Hard Reset Nokia N95 and Nokia C7-00. Как сделать сброс настроек factory reset 2024, December
Anonim

The Chinese phone Nokia N95 is a fake smartphone of the Finnish corporation Nokia with the same name. It has low-quality firmware and bad Russification, so many users may face a number of difficulties. You can solve the problem of the Chinese version of the model by flashing the device.

How to flash a Chinese phone nokia n95
How to flash a Chinese phone nokia n95

Instructions

Step 1

Browse the Internet and download the NEMESIS software (NSS) to your personal computer. Be sure to make sure the download source is verified and free of viruses. For example, you can use the link

Step 2

Check the downloaded file with antivirus software. Then start the installation of the program. During it, the message Please select from the following Service device you will be using after the instalations should appear, to which you must respond by selecting the Virtual USB device item. The application will also require the installation of the USB driver. In this case, you must click the "Cancel" button.

Step 3

Perform a full backup of your Chinese Nokia N95 phone. To do this, remove the memory card and disable Nokia PC Suite, if it is installed on your device. Connect your phone to the charger and cable.

Step 4

Connect the cable to your PC and select PC Suite mode. The corresponding connection icon will then appear at the top of the phone display. Place the device neatly on the table and do not touch it during the entire subsequent firmware procedure.

Step 5

Run the Nemesis program, which is already installed on your computer. First, there will be an application splash screen, and then a gray window will appear with two active buttons on the left and right. You need to click on Scan for new device and wait until the blinking Ready appears in the bottom line of the program status.

Step 6

Then press the button "6600", then select the inscription Phone Info. Wait until Ready flashes again and press the Scan button. Information about the Chinese phone Nokia N65 appears. Click on the Read button. Click on the Product Code line, in which enter the numbers "0551405". Check the box next to Enable and click on the Write button. Close the program.

Step 7

Take your phone and start Nokia PC Suite, in which select "Phone software update". Go to Nokia official website and download NSU software for your Nokia N95 model. Follow the step by step instructions to install the new firmware.

Recommended: