You need to remove the Nokia N73 case. The reasons may vary. For example, to clean the inside of the phone, or you are simply tired of the old case. Turning the mobile phone in your hands, you did not find any screws. How to disassemble it? Read the instructions.
Necessary
- Screwdriver
- Plastic card or guitar pick
Instructions
Step 1
Before you start disassembling the case of your mobile phone, do not forget to remove the SIM card, memory card and battery from it, after turning off the phone.
Step 2
The front of the phone is removable with buttons. To do this, pry it with a plectrum or a plastic card around the entire perimeter. In order to remove the buttons from the front, it is enough to press them slightly from the outside.
Step 3
Find seven screws under the front and remove them. Then you can remove the transparent plastic overlay located above the keyboard.
Step 4
There is a metal frame above the display. To remove it, you need to carefully bend the latches around the perimeter of the screen.
Step 5
Gently lift the display and disconnect its flex cable from the phone by prying it at the base with a pick. Then remove the display.
Step 6
Then disconnect the ribbon cable from the front camera by prying it off at the base. And remove the camera from the phone.
Step 7
The main board is covered with a metal plate. Pull it out carefully. You have now reached the main board. Pry it slightly with a thin screwdriver and remove it from the case.
Step 8
After you took out the board, you have access to the speakers, microphone, charger connector. Remove them from the case too. That's all.
Step 9
Now you can clean your phone or change the case. Reassemble by following the instructions in reverse order.
