How To Set Up A Rainbow Tv

Table of contents:

How To Set Up A Rainbow Tv
How To Set Up A Rainbow Tv

Video: How To Set Up A Rainbow Tv

Video: How To Set Up A Rainbow Tv
Video: Ecolor WiFi Rainbow TV Backlight Setup 2024, May
Anonim

Rainbow TV is a satellite digital television that provides a package of television channels and is intended for individual consumption. Tuning the antenna to receive this television channel is a little more difficult than the others, due to the lower signal strength. Accordingly, you will need a little more patience and time, but all actions are feasible and do not require special skills.

How to set up a rainbow tv
How to set up a rainbow tv

Instructions

Step 1

Raduga TV channels are broadcasted from ABS-1 satellite. The set of equipment should provide you with the Golden Interstar GI-S790 IR Xpeed receiver, pre-programmed to receive all Raduga TV channels. Also, some system settings should be pre-installed, such as Russian as the menu language and the main audio language.

To turn on the sound indication, go to the menu, select the item "user settings" and then stop at the sound signal level. Select a number from one to ten that corresponds to the sound level. This item allows the installer to monitor by ear the presence of the signal received by the antenna, as well as the degree of accuracy of its tuning to a particular satellite.

Step 2

To configure the receiver for reception, select the "Installation" item in the menu and select ABS-1 in the satellite list. Satellite TV "Rainbow TV" is always broadcast from this satellite. Next, find the “TP Settings” submenu, where select the Raduga TV transponder. There can be many of them, and they are expressed by a set of numbers, for example, 12518.

Step 3

Further in the window of the same menu, pay attention to two indicators: "Quality" and "Power", the level of which is displayed in numerical form. An antenna connected but not tuned has the following values: power - 50%, quality - 30%. Tuning Sound shows the frequency of short beeps at approximately 1 second intervals. For optimal tuning, set the graphs to the maximum values and the minimum interval between beeps.

Step 4

To make sure the antenna is tuned to the correct satellite, go to the channel list view. Since you do not need to search for channels yourself, a list should appear on the screen. This means the antenna is ready for use.

Step 5

If you have any questions, go to the "Rainbow TV" website and in the "Support" section, ask a question to a specialist. Also on the site you can find any contacts with company employees: email, phone, ICQ, Skype.

Recommended: