How To Enter The Service Menu Of A Samsung TV

Table of contents:

How To Enter The Service Menu Of A Samsung TV
How To Enter The Service Menu Of A Samsung TV

Video: How To Enter The Service Menu Of A Samsung TV

Video: How To Enter The Service Menu Of A Samsung TV
Video: How to Enter into Samsung TV secret Service Menu with EXPLANATION. TV reset, Screen test, TV mileage 2024, November
Anonim

The service menu of the TV serves for additional settings of the parameter of data reception and the transmitted image. There are several combinations to activate it, suitable for different models.

How to enter the service menu of a Samsung TV
How to enter the service menu of a Samsung TV

It is necessary

Remote control

Instructions

Step 1

Pay attention to the release time of your TV model. It is possible that if the model was released relatively recently, there are slightly different codes for it. This is due to the fact that this menu is constantly being improved, and as Samsung releases new TVs, a certain program is installed in them, which is launched using different combinations on the remote control.

Step 2

Take the remote control, quickly and consistently press the following buttons: MUTE-1-8-2-POWER ON. Please note that it is best not to allow a break between pressing the buttons for more than 1 second, since the combination can simply be reset. If you pressed the wrong button, wait a few seconds and start over.

Step 3

If successive pressing of the above buttons did not give any results, use another code to enter the service menu of the Samsung TV. This can be a combination of info-menu-mute-power, which is most typical for devices of already outdated TV models.

Step 4

After you enter the TV service menu, make the necessary changes in its operation, and then exit, saving the settings. In order to navigate through the service menu items, use the arrow buttons, OK and Menu (the latter returns you to the previous position).

Step 5

If the settings you made did not reflect the image quality in the best way, open the service menu again and select restore factory settings. If you have no idea what will entail changing this or that parameter, it is best not to open the service menu.

Recommended: