A set of satellite television makes it possible to receive a high-quality signal of television programs throughout the entire coverage area of the satellite. In particular, the signal from the ABS 1 75e satellite, from which the Raduga TV provider broadcasts, is received throughout Russia and the CIS countries. To do this, it is enough to have a satellite dish with a diameter of 90 cm, a tuner with a CI slot or an Irdeto 2 module, a Ku-band linear converter and an access card. Setting up the receiver is not difficult, you can easily do it yourself.
Instructions
Step 1
Install the satellite dish in the yard, on the wall or roof of the house so that in the direction of the ABS1 75e satellite there are no obstacles to signal reception, such as tall trees or tall buildings. To determine the rotation and elevation of the cymbal, use the website www.dishpointer.com
Step 2
Connect the coaxial cable from the Ku-band linear converter to the satellite receiver to the LBN in jack. To receive the signal of the Raduga TV provider, it must have a module for decoding the signal in the Irdeto 2 system or a card reader (CI slot) for installing an access card into it.
Step 3
Connect the receiver to your TV. Turn it on. Set up, for example, the World Vision satellite tuner recommended by the Raduga TV provider. To do this, press the "Menu" button on the receiver's remote control. Go to the User Prefence tab. Commit your selection by clicking OK. Click on the "Right" button and select the menu language that will be displayed in the future. Click OK. On the "Menu" tab, select the "Installation" line. Press the OK button and enter the factory code 0000 in the pop-up window that appears. Press the OK button.
Step 4
Press the "Right" button and set the antenna to receive from transponders 12548 and 12610, polarization - vertical (v), flow rate - 22000. The scale in the settings window will show the quality and signal strength in percent. If these parameters are not enough, adjust the satellite dish by slowly moving it left-right and up-down. When the maximum signal appears, fix it.
Step 5
If the transponders are not entered or their parameters have changed, then manually enter their values. Press the blue button and scan the channels. Follow the same procedure when adding a new transponder. Go down to the bottom line and search for programs.
