Everyone in his life had to tune channels on different TV models. Their search process is about the same. This also applies to the Sony Bravia TV. On some models, you can tune channels without using the remote control.
Instructions
Step 1
Use the automatic search function for all available TV channels for your Sony Bravia brand model. On the front of the TV panel there is a Menu button. Hold it for a few seconds to start channel settings. The remote control can also be used for this purpose. “Menu” and “Auto Channel Search” appear on the TV screen. Wait for the tuning of the found channels to be completed. After completing the procedure, your TV will return to normal viewing mode.
Step 2
You can tune channels manually. You can start this mode using dedicated buttons on your remote control or on the panel of your Sony TV. The channel frequency is adjusted with the + - buttons. After that, adjust the signal quality using the "Fine Tuning" function. Repeat these steps for each TV channel.
Step 3
To move from one item to another in the TV menu, use the buttons to adjust the volume. On some models of Sony TVs, the found channel in the automatic search mode must be fixed for later storage by pressing certain buttons on the remote control.
Step 4
Find the manual for your Sony Bravia TV and read it. Take a look at the section on channel tuning. If you were not provided with this manual along with the TV system kit, then you can download it on the official Sony website or using other Internet resources. If you were unable to tune the channels on your TV, then call technical support. There you will be explained in detail the entire setup process, from start to finish. The service phone number is listed in the documentation.
Step 5
If you are using satellite equipment, and not a conventional antenna, then tune the channels directly on the receiver itself.
