Provider "Raduga TV" offers in its packages of paid satellite digital television channels for watching the whole family. In addition to broadcasting programs from third-party producers, Raduga TV also offers its own product under the Club 100 brand, such as Illusion +, Russian Illusion, Zoo, Eurokino and Detsky. The satellite coverage area completely covers the entire territory of the Russian Federation and the CIS countries. To view channels, you need to install and configure the antenna for reception.
It is necessary
- - Ku-band linear converter;
- - satellite tuner with a CI slot or with the ability to receive Irdeto 2 coding.
Instructions
Step 1
Install the satellite dish in a place where there will be no obstacles in front of it - a wall of a high-rise building or tall trees. To receive the signal of the Raduga TV provider, you will need a dish with a diameter of at least 90 cm, a satellite receiver (tuner) that can receive a signal encoded in Irdeto 2, or one that has a CI slot for installing an access card to digital channels, as well as a Ku- range.
Step 2
Determine if your location falls within the coverage area of the Raduga TV provider and what antenna diameter is required to receive the signal. Rotate antenna towards ABS satellite 1 75e, 75 degrees E. To do this, use the site www.dishpointer.com, where enter the name of your city or its geographic coordinates in the search bar
Step 3
Then, on the satellite map, select the location of your house and click on it. Below the search bar is a drop-down menu with the name of the satellites. Select ABS 1. The green beam will show the direction, and the azimuth to the satellite, the angle of the antenna (tilt of its mirror) and the degree of the converter rotation will be indicated at the bottom.
Step 4
Connect the coaxial cable through the F-connectors of the converter with the receiver, and it with the TV. Turn on the tuner, tune the channel of the receiver on the TV. The television provider Raduga TV broadcasts from transponders: 12548v22000 and 12610v22000, where the first digit is the frequency, v is the vertical polarization, and the second is the flow rate.
Step 5
Enter this information into the receiver using the remote control. Begin to slowly turn the antenna left and right until a stable signal appears, at this time the value of the quality and signal strength will change in the channel setting window on the TV. Fix it, turn the converter to achieve a stronger value and fix it. For a more accurate setting, you can use special devices.
