Turning on faulty phones by connecting them to a computer is not available for every device model, most often this is typical for models with internal memory modules that do not support work with flash cards. Before turning on the phone in this way, it is also recommended to download the service manual for your model.
Necessary
- - Internet connection;
- - USB cable.
Instructions
Step 1
Make sure your mobile device model supports activation by connecting to a computer. Make a request on the Internet and look for information on the forums dedicated to the phones of this manufacturer.
Step 2
Even if you find the necessary combination to turn on your mobile device in this way, carefully read the list of necessary recovery utilities. However, you should not use inappropriate software, as you can damage the device. A set of utilities is usually only in English, in case you are not sure about the meaning of the written words, do not take to turn on the phone in this way yourself.
Step 3
Download the program you found and connect your phone to your home computer using a USB cable. It is best if you have a mobile phone service manual available, however, these are rarely posted on the Internet and never come with devices.
Step 4
If you managed to find a manual, open it with Acrobat Reader and read about the additional features of your phone. Please note that in some cases it is recommended to remove SIM cards from your mobile device before connecting to a computer.
Step 5
In the utility you are running on your computer, select the required command from the menu interface that is required to turn on the phone. Press the key combination used specifically for your model. Perform the necessary sequence of actions specified in the instructions for the program or service manual. If this does not lead to any positive results, take the phone to a service center.
