Television has become a habitual phenomenon in our life for a long time. In order to improve the quality of TV broadcasting, the Government of Russia signed a decree on the transition until 2015 to a new international format - DVB. But for the transition to a new standard, new special equipment is needed - a digital receiver.
Necessary
Low frequency scart cable, TV cable or bell cable
Instructions
Step 1
There are several ways to connect your TV and DVB box.
The connection can be made with a low frequency scart cable. It looks like a rectangular plug with a lot of terminals. Connect the set-top box with this cable to the input socket of the TV. Then the TV antenna must be connected to the input connector of the set-top box (RF-IN).
Connect the lettered output of the set-top box (VCR) to the VCR for audio signal. Use the second skart cable socket to connect the set-top box and the TV. This completes the connection.
Step 2
If one of your devices does not have a second such "skart" connector, in this case the connection is made with a high-frequency television cable. It looks like a round plug with a diameter of about 1 centimeter.
Step 3
There is also a cable connection option with bell-type connectors. This cable has two or three colored connectors at the ends - red, white and yellow. Colors vary. You will need 2 data cables. Step by step, in accordance with the colors of the connectors, connect to the TV and to the set-top box. Connect the audio input to the audio receiver, i.e. to the set-top box, audio output to the TV.
Step 4
If you plan to feed sound through a sound system, then connect the audio output to the speakers, in accordance with the instructions for them.
Repeat this procedure for a cable with video input and output. Entrance, i.e. from where we get the signal - to the set-top box, the output - to the TV.
Step 5
Further, regardless of the connection methods, all your actions are the same:
- connect the power adapter to the set-top box;
- turn on the power of the set-top box and turn on the TV.
- on the TV, using the remote control, select the AV input to which the antenna is connected.
