Tricolor TV is the leading satellite TV operator in Russia. It provides its clients with digital TV broadcasting services throughout Russia. The advantages of the Tricolor project include a large package of channels without a monthly fee, which other satellite television operators cannot boast of. You can install the plate with your own hands, the main thing is to follow the sequence of installation work.
Necessary
- - Key for 10;
- - key for 13;
- - anchor bolts;
- - wood grouses with dowels;
- - insulating tape.
Instructions
Step 1
Installation of the Tricolor begins with the assembly of the plate itself. This should be done in accordance with the instructions supplied with the antenna. If for some reason it is absent, take a closer look at the dishes installed on neighboring houses, and, according to their principle, assemble your antenna.
Step 2
Now decide where you will put the plate. All satellites are located above the equator. For Russia, it is located on the south side, which means that the antenna should be directed to the south. In this case, it is not at all necessary that the windows look strictly to the south. It will be quite enough that it is simply visible and not overlapped by tall trees and neighboring buildings.
Step 3
Most often, the plate is installed outside the window. To do this, fix the bracket in place on which the satellite dish will hang. Fastening is best done using anchor bolts or wood grouses with dowels, the diameter of which can vary from 10 to 14 mm. For greater security, use all holes provided for fastening.
Step 4
Now screw the converter installed on the antenna onto the wire on both sides, which you will find in the kit with the plate. Screw one end of the wire onto the converter, and connect the other end to the satellite receiver into the LNB IN connector.
Step 5
After that, you can hang up the satellite dish itself. To do this, tighten the nuts vertically and horizontally, but not completely. This is necessary in order to be able to move the plate with little effort. At the same time, it should not fly off the fasteners.
Step 6
Next, connect the receiver to the TV and start moving the plate towards the south. The antenna must be moved smoothly without any jerking, and at this time, you need to monitor the receiver. Once you get a signal, tighten all the nuts on the cymbal. After that, in automatic mode, search for all channels from the satellite.
