Not every phone battery can be pumped. There are such hopeless cases where the battery loses its capacity, and nothing can revive it. Lithium-ion batteries are best suited for this procedure, they are very easy to pump.
Necessary
Mobile phone, lithium-ion phone battery and charger
Instructions
Step 1
The lithium-ion battery needs to be completely discharged to the point where the phone can no longer turn on. During this procedure, the battery must be in the mobile phone.
Step 2
To completely discharge the battery, you can load your mobile device with energy-intensive applications. For example, play games, listen to music, it helps the battery to discharge, even just switching between pages takes up a sufficient amount of energy.
Step 3
If the mobile phone does not support energy-intensive applications, then it is enough to simply turn the device on and off until it is completely turned off. The fact is that while searching for networks, a mobile phone spends a lot of energy, and this allows the pumping procedure to go through faster.
Step 4
After the battery is completely discharged, you need to put your mobile device on charge. It is necessary to charge to the maximum possible charge of the lithium-ion battery, since the first charge cycle of the battery restores its capacity, but not full power from its capabilities. To improve the result, you need to carry out this procedure several times.
Step 5
In the future, using a mobile phone, you must not forget about the "pumping" procedure and apply it approximately every 50 charges.
Step 6
Do not knock on the lithium-ion battery, squeeze it, as such impact can severely damage the provided battery. Minor damage to the lithium-ion battery will result in its failure, and if severe damage occurs, the battery may behave unpredictably during charging and operation of the mobile device, possibly causing an explosion.
