How To Put IPhone Into Dfu Mode

Video: How To Put IPhone Into Dfu Mode

Video: How To: Get into DFU Mode on your iPhone! 2024, December

2024 Author: Ian Gardner | [email protected]. Last modified: 2023-12-17 01:17

The Device Firmware Update (DFU) mode is used to flash the iPhone modem, regardless of the version installed. In DFU mode, there are no images on the screen of the device at all, and it remains black, in contrast to Recovery mode, in which the USB cable and the iTunes icon are displayed on the screen of the device.

Instructions

Step 1

Connect your device to your computer with a connecting cord.

Step 2

Turn off the iPhone by holding the Power button located on the right side of the device until a bar with an arrow appears on the screen.

Step 3

Use the slider to confirm to turn off the device - drag the arrow from left to right.

Step 4

Press and hold the Power button for 3 seconds.

Step 5

Press the Home button located at the bottom center of the iPhone while holding down the Power button.

Step 6

Keep both buttons pressed for 10 seconds.

Step 7

Release the Power button when the Apple logo appears on the device screen, but do not release the Home button.

Step 8

Wait for iTunes to see a message about detecting a new device in recovery mode. This process can take up to 20 seconds. The same result can be achieved by connecting the iPhone with a USB cable.

Step 9

Connect the USB cable to the device and note the connection and disconnection sounds.

Step 10

Hold down the Power and Home buttons at the same time until you hear a disconnect sound.

Step 11

Release the Power button while continuing to hold the Home button.

Step 12

Wait for the following sound to appear and release the Home button. An alternative method of putting iPhone into DFU mode does not require counting seconds or your ear for music, but is only suitable for Windows users.

Step 13

Download the archive required for a successful operation a

Step 14

Unpack the downloaded file to the root system of your hard drive (the path to the archive should look like C: / DFU /.

Step 15

Connect your device to your computer, but do not start iTunes.

Step 16

Press the "Start" button to call the main system menu and go to the "Run" item.

Step 17

Type c: / dfu / dfu iBSS.m68ap. RELEASE.dfu in the search bar and press Enter.

Step 18

Wait until a white screen appears on the device, symbolizing the possibility of proceeding to the flashing operation.

How To Put The Phone In Tone Mode

Very often, when we call the support service or the hotline, we hear a polite mechanical voice suggesting to switch the phone to tone mode. And how to do this, the mechanical voice does not explain to us. It is necessary Telephone set, instructions for turning on the tone mode

How To Put A Siemens Phone In Tone Mode

You bought a Siemens phone for your home, but here's the bad luck: you need a tone-based dialing mode (for example, to follow the prompts of an autoinformer about services), but the instructions are written in such cloth language that you only have to shrug your shoulders

How To Enter DFU Mode

DFU mode is used when iTunes cannot detect i-device. This could be caused by damaged firmware. DFU mode refers to recovery modes of operation, just like Recovery mode. Instructions Step 1 Both recovery modes of operation of i-devices - Recovery and DFU - are used for flashing devices

How To Exit DFU Mode

The method for exiting DFU mode on i-devices is determined by how the device was inserted into it and the presence of a jailbreak. Usually the standard method is sufficient, but in some cases additional software may be required. Instructions Step 1 Download and install on your computer a specialized application iREB designed to perform the operation of flashing jailbroken devices

How To Put A Cell Phone In Tone Mode

Transferring phones to tone dialing mode can be quite problematic. This is especially true for models with touch controls, but there are problems in phones with mechanical buttons. Instructions Step 1 After starting the connection, use the special soft-key to access the keyboard, which will appear on the screen after pressing