The popularity of bluetooth headphones lies in their ease of use and practical versatility. To start using them, you need to connect to the phone.
Instructions
Step 1
First, activate bluetooth on both devices. To turn on bluetooth on the headphones, hold down the power button for about 8-10 seconds. As a result, the light diode will start blinking, which will mean that the required mode is on. Typically, it works within 30 seconds. To enable bluetooth on the phone, go to its menu and select the bluetooth activation mode in the corresponding item.
Step 2
Then search for active devices using your mobile phone. For reliable signal reception, the distance between the mobile phone and the headphones should not be more than 8-10 meters. After the list of bluetooth environment is formed, specify the required item.
Step 3
After that, the identification process will start. The phone, having found a bluetooth headset, will add it to its list of devices. Then pair your mobile phone and wireless headphones. Headphones and a phone, like any other bluetooth device, have their own personal MAC address consisting of 48 bits. To complete the pairing, the phone will send its MAC address, which the headset will add to the list of devices intended for operation. However, the pairing will not be fully established until the password is entered in the window that appears on the phone. Generally, the default is 0000, but some bluetooth headphone models may use other values. You can learn more about them in the instructions.
Step 4
The devices are then ready to work together. The distance that the signal is capable of transmitting is about 10 meters, but in rooms it can be reduced. In addition, bluetooth headphones cannot work with multiple devices at the same time. The headset is powered by a built-in battery, usually a lithium polymer battery.
