Using wireless headphones allows you to watch TV without disturbing others. This is very important for small apartments or those families with small children. To use these headphones, you need to configure them.
Instructions
Step 1
Connect the micro transmitter to a power source. If the device uses batteries, remove the back cover and insert the batteries into the corresponding socket, then put the cover back on. If the device uses a power supply, connect it to the transmitter using the appropriate plug, and then plug it in.
Step 2
Next, connect the microtransmitter to the TV's audio line-out jack. Typically, it has a tulip interface. Some TV models use a connector with a different interface. If your TV has one of these line-out jacks, purchase the appropriate adapter in advance. Also, some models have a dedicated audio output for connecting headphones.
Step 3
Then turn on the microtransmitter using the corresponding button. If it works correctly, the indicator should light up, signaling normal operation.
Step 4
After that, you need to turn on the device for radio reception, to which the headphones themselves are connected. This is usually done by turning the volume control wheel. Use the dedicated button to scan the range to find the signal from the transmitter. In some cases, this may not work right away, since some radio stations broadcast on the same frequencies. If unsuccessful, click the reset search results button and try scanning the range again.
Step 5
Next, you need to adjust the sound level. The optimum volume is considered to be a fifth or a quarter of the maximum possible. Above a third of the volume significantly increases the risk of sound distortion and other interference.
Step 6
When watching TV from a distance of more than 7-8 meters, the reception quality of the transmitted signal deteriorates significantly. In some cases, it may disappear altogether.
