A satellite receiver is required to convert a digital signal received from a satellite dish into a low frequency signal that can be understood by a conventional TV. To access the channels, you must log in to the receiver emulator.
It is necessary
Openbox receiver
Instructions
Step 1
Connect the receiver to the antenna and TV input. Turn it on and use the remote to go to the menu. To enter the Openbox emulator, you must press the key combinations, which will depend on the specific model of the receiver. Please note that these combinations will only work if the receiver's firmware supports the emulator.
Step 2
Log into the emulator of the F 100 receiver. To do this, go to the menu, using the remote control, dial the combination of numbers 19370, then 2486. Perform the same actions for the Openbox receiver versions x6 * 0, 210CI, 8100CI. If you have a receiver of the OpenBOX F-300FTA, X800 UniCAM or X820 UniCAM + 2CI brand, press the "Menu" button, then dial the numbers 1117 in sequence, select the "Emulator" item in the menu that appears on the screen. Use the keys to set the position "On".
Step 3
Activate the emulator in the Openbox receiver versions X300, 5 * 0, x 8 * 0. To do this, go to the menu, then use the buttons on the remote control to type the key combination 1117. To activate the emulator Openbox x7 * 0 (X730, X750, X770), go to any channel, on the remote control press the button "Menu", then dial the combination keys 8282.
Step 4
Log into the emulator of the following brands of Openbox receivers: AF1700, AF8100CI, F100, F210CI, X600, X620. To do this, press the "Menu" button, then on the remote control dial the combination of numbers 19870. Wait for the frame to appear on the screen. In it, enter the numbers 2486.
Step 5
Then select "Games". This is where the emulator is located. If you have an Openbox F-100FTA receiver. H, go to the menu, click on the "Games" option. Then dial 9999 from the remote control. After entering the emulator, you can enter the channel keys. Please note that only six key pairs need to be entered in this receiver. If the key has eight pairs of numbers, then enter all except the fourth and eighth pair.
