Sometimes there are situations when it is necessary to remotely monitor the situation in one place or another - at home, in the office or in the car. This is helped by listening devices, of which there are a great many today. But you don't have to go and spend money on fancy spy gadgets. It is quite possible to deal with this problem on your own.
Instructions
Step 1
Use a special program for smartphones that allows you to remotely control all kinds of sounds and notify you about them. SkypeSpy can be used as an alarm for home or office, it can monitor the state of the child, and, of course, it can be used as a wiretap.
Step 2
Place the smartphone with the installed program in a place where you want to control sounds (in a children's room, office, car, etc.). The communication program connects with another device, and when it detects any sound, the smartphone sends SMS, MMS or calls. Such programs can be found on ExSmart. Net, smart60.ru, alldown.ru, M-TEL.ru, dimonvideo.ru.
Step 3
If you need to wiretap your home phone via a modem, download the ModemSpy program. Install it on your computer. Select File -> Preferences, in the Hardware tab select your modem. In the Recording tab, configure the conversation recording modes.
Step 4
With the first setting, you can put on the machine all incoming and the counter of the start time of the recording. The second is responsible for outgoing calls. The last setting is responsible for filtering recording files of certain sizes. The disadvantage of the program is that you cannot record and listen to the conversation at the same time, since you can stick into it and find yourself. The link for downloading the program is
Step 5
If you want to do wiretapping with your own hands, use the schemes for making bugs for wiretapping. There are a lot of them on the Internet, from basic to professional. This will require certain skills and experience in electronics.
Step 6
If you want to establish a wiretap in the next room, use a microphone and a recording device (up to the player). You can install such a device on a cabinet, or in a ceiling lamp or sconce and bring the wires to the next room, where the signal will go.
Step 7
Use a statoscope. A primitive glass-to-door approach, but oddly enough, it works. But this is really quite in emergency situations, but you do not have to spend money on expensive equipment or computer programs.
