In order for the network to be more balanced and reliable, it is necessary to connect an access point. Connecting to a Wi-Fi network requires just an access point. You can cope with this problem very quickly, having a few minutes of free time.
It is necessary
ADSL modem, computer
Instructions
Step 1
Return your ADSL modem to its default settings first, this will help you use the modem's IP address. This will be the first step to connect the access point.
Step 2
Take a look at the instructions that came with your modem and find everything about settings. Connect the modem to your computer's network card.
Step 3
Be sure to configure the network card so that the automatic IP address information comes in.
Step 4
Open your preferred browser and enter the address of the modem. Enter the password, username in the window that appears. Look for this data in the attached instructions for the modem. The access point connection is based on the parameters you entered, so try not to be mistaken.
Step 5
Configure the connection of the modem to the Internet by entering the VPI and VCI parameters, specifying the connection protocol. Be sure to save your settings.
Step 6
Check your Wi-Fi adapter and restart your modem.
Step 7
Turn on the computer, re-enter the modem settings and check if the automatic acquisition of the IP address has been configured. Check all the settings again, compare the received addresses when setting the modem and Internet connection (gateway, IP address). Go to a website to check your performance. Your access point is configured.
