How To Enter Keys From The Remote

Table of contents:

How To Enter Keys From The Remote
How To Enter Keys From The Remote

Video: How To Enter Keys From The Remote

Video: How To Enter Keys From The Remote
Video: How to remap keys on ANY KEYBOARD | Windows 10 2024, April
Anonim

Entering keys to unlock satellite TV channels is not available for all receivers. Find out more information on this topic before purchasing, as well as learn in advance about the possibilities of installing the device firmware program.

How to enter keys from the remote
How to enter keys from the remote

It is necessary

  • - receiver;
  • - television;
  • - remote controller;
  • - access to the Internet;
  • - flash drive;
  • - flashing program.

Instructions

Step 1

Find in the service menu of your receiver a special field for entering keys using the remote control. If your equipment has not been flashed before, most likely you will not find the key entry form. Therefore, search for the latest firmware for your device model.

Step 2

Choose the one that works best according to user feedback and download it to your schematic drive. Please note that when updating the software, there should be no extraneous files on the flash drive.

Step 3

After downloading the firmware program to your receiver, check your removable disk with an anti-virus program, paying special attention to the installer. If the firmware file is in the archive, unpack it. After checking, insert the flash card into the corresponding socket of the receiver, and then start the software update mode from its service menu. For details on the procedure for flashing your model, be sure to check the instructions for the program or on the download page, since in some cases the sequence of turning on and off the device may be different.

Step 4

Run the update from the removable drive, and then wait for the receiver to restart. Remove the USB stick from the device. Check if an emulator for entering keys has appeared in the receiver, and then make the necessary equipment settings.

Step 5

Please note that if you have not previously performed a flashing of receivers, do not do it yourself for the first time, it is best to contact the services of a service center or ask your friends to figure out the setting for you. Also, do not neglect the instructions provided by the firmware programs, even if you have previously performed a software update, new versions may have their own peculiarities.

Recommended: