If you have a special emulator program in your satellite tuner, it may contain the keys to the encoded channels. They are collected in the appropriate encodings, the list of which reaches ten. To enter the keys, you need to know how to get into the emulator.
It is necessary
- - television;
- - satellite tuner.
Instructions
Step 1
Activate the emulator on the satellite receiver to be able to enter the keys from the channels. The order of activation will depend on the manufacturer of the receiver. In the case of the Digital 4000 receiver, turn on any channel, then press the 9339 or 9976 button combination on the remote control.
Step 2
To activate the emulator in Golden Interstar and start entering channel keys, sequentially press the following buttons on the receiver's remote control: Menu, 2, 5, 8, 0. Using the same sequence, the emulator can be turned off.
Step 3
Activate the emulator on the Star ASR receiver. To do this, press the "Menu" button on the receiver's remote control, then go to the "Main Menu", select the "Parental Control" option. Press the i button on the remote, then enter the code 2004 from the buttons.
Step 4
Click the Set default key command in the menu that opens, then set the Key emu function option to the "Enabled" position. Press Exit on the remote. To activate the emulator in the Euston receiver, press the 7799 button combination, then a menu containing a set of keys will open.
Step 5
In the X-Cruiser receiver, go to the "User Settings" menu, select the "Password for children" item, enter the value 3333 in the "Current password" field, below the item will appear to go with the red button on the Go to Key Manager remote control. With it, you can enter the channel codes into the receiver. Activate the emulator in the Topfield receiver, for this in the menu go to the "System information" item, enter the value 121 from the remote control.
Step 6
Before entering the channel keys, make sure that this channel is registered on the "required" satellite and that the channel's broadcast settings have not been changed. Next, enter the receiver emulation mode and write the channel, for example, the Inter channel, which is located on the Amos satellite, has a frequency of 11389, horizontal polarization and a flow rate of 27500. It has a key 12 34 AC F2 12 34 AC F2. To check if these parameters correspond to reality, press the button on the remote control i. The channel parameters will be indicated in the right column.
Step 7
Next, find in the emulation mode the key belonging to the channel you do not need, click the Key Edit button. Next "OK", select the Biss encoding, click "OK". Highlight the line with the old key, press the red button on the remote control. From left to right, enter the channel data. Click OK, then Exit.
