Setting up a satellite dish is carried out during its installation and fixing. The direction of its location and the angle of inclination depend on which satellite it should be tuned to receive the channels of which satellite. Usually one antenna is directed to several satellites at once.
It is necessary
satellite antenna
Instructions
Step 1
Install the antenna wall mount on any vertical surface. It is advisable to assemble it and install the multifeeds at home, and then fix it on the mount. Install the center converter on the central antenna bracket, as well as multifeeds intended for attaching the side converters.
Step 2
Connect the multifeed to tune the head to the Hot Bird satellite, looking at the antenna, it is located on the left. Slide the mounting plate over the satellite dish. Tighten it with a bolt-nut, install fasteners in the form of a ring on the other end of the bar. Insert a metal tube with a converter holder into it. Set the converter to multifeed. Rotate it about 100 degrees, facing the satellite dish, counterclockwise. Typically, one graduation is five degrees.
Step 3
Install the second multifeed, as well as the converter for connecting to the Amos satellite, it is on the right, turn the converter 15 degrees counterclockwise. Fasten the third converter in the center of the arc, position it 15 degrees to tune to the Sirius satellite. Finally tighten all fasteners, be more careful with the fastening of the converters.
Step 4
Tune the antenna to the satellite. First, install the central satellite; for this, connect the converter wire to the DiSEqC switch input. Then connect the cable to the tuner input and tune the equipment to the satellite, for example Sirius. Connect the receiver to the TV, make the settings according to the instructions. Select the mode in the "Antenna installation" menu, set the following settings in manual search: frequency - 11, 766, horizontal polarization.
Step 5
Achieve a signal that has two characteristics - quality and strength. Focus on the first indicator. Place the antenna vertically and rotate slowly. Maximize signal strength and turn on scan mode to determine which satellite is tuned to. The channel list will be displayed on the screen.
