How To Enter Keys For Satellite Channels

Table of contents:

How To Enter Keys For Satellite Channels
How To Enter Keys For Satellite Channels

Video: How To Enter Keys For Satellite Channels

Video: How To Enter Keys For Satellite Channels
Video: Tutorial on how to unscramble channel by inputting bisskey,powervu,tandberg key on satellite decoder 2024, December
Anonim

To access satellite channels, you must first enter the emulator mode on the satellite receiver. Not all tuners have this capability, and access to this function depends on the model of a particular tuner.

How to enter keys for satellite channels
How to enter keys for satellite channels

It is necessary

  • - television;
  • - satellite receiver.

Instructions

Step 1

Enter keys on ORTON 4100 7010 receivers. Go to any channel, enter 9339, then go to the Key Edit menu, click OK. In the appeared window with encodings from the list, select Biss, click "OK". Then you will see the following inscription - Provider Tire inde Key Data.

Step 2

To add a channel, press the green button, to edit - the red one. Please note that you can only edit a non-working key. After pressing the button, enter the key value, then click OK, save the key and exit the menu.

Step 3

Enter the key into the Startrak receiver. To do this, dial 9976 or 9339 on any channel. Select from the list of encodings - Biss, then press "OK". Switch to volume; to do this, press "+" or "-", then enter the key in the field with zeros and letters F. Then, in the Transponder freg field, set the transponder frequency, in the Servis id field, enter the identifier value. Leave PMT PID unchanged. Then press Epg and save the key.

Step 4

Enter the key for the channels on the Openbox 800 series receiver. To do this, go to the channel where you want to add the key. Click the menu, then enter 1117. In the opened window with a list of encodings, select Biss, click "OK". You will see the inscription Video Key Aydio Key.

Step 5

Select a non-working key or an empty one from the list, then press the red button to edit. Enter the key value twice. Click OK to save the key and OK again to activate it. If you have correctly entered the key for the channels, the line with it should be highlighted in blue.

Step 6

Exit the menu. Perform similar actions for other models of the Openbox receiver, before that activate the emulator. To do this, press "Menu", dial 19370, in the box that appears, enter 2486. Select the "Games" item, it contains the emulator. In this mode, you can enter keys.

Recommended: