How To Check The Lens Upon Purchase

Table of contents:

How To Check The Lens Upon Purchase
How To Check The Lens Upon Purchase

Video: How To Check The Lens Upon Purchase

Video: How To Check The Lens Upon Purchase
Video: 7 Things to Check For When Buying Used Lenses 2024, December
Anonim

The lens is an expensive piece of equipment for cameras, the cost of which can significantly exceed the price of the device itself. When choosing, it is important to pay attention to the quality of the lens in order to protect yourself from counterfeiting and purchase a really high-quality product for working with the camera and getting good pictures.

How to check the lens upon purchase
How to check the lens upon purchase

Instructions

Step 1

Be sure to bring your camera with you before purchasing a lens. It is also advisable to grab a flashlight and laptop to test the quality of the images and lenses. You can print special targets to check focus and sharpness adjustable through the lens. Pre-study the lens models on the Internet, their parameters and possible problems. Identify the specific products that you would like to test.

Step 2

Arriving at the store and choosing the desired optics, check its complete set. The lens must include a lens cap, hood, warranty card and instructions for use. Some models come with a cover.

Step 3

Take a lens and carefully examine its body and lens. Look for scuffs, scratches, cracks, or impact marks. Some retailers try to sell used lenses as new, so you should be careful. If the product has scratches or marks of use on the filter thread, it is best to put the lens aside and look for other models.

Step 4

Turn the wheels for focus and zoom. All rings should rotate easily and smoothly. If available, check the sliders for switching the focus mode, activating the stabilizer, etc. Shine a flashlight at an angle to the lens and estimate the amount of dust that may have accumulated inside the device. New optics shouldn't have a lot of dust inside the case.

Step 5

Place the lens on the camera. The gap between the lens and the device mount should be kept to a minimum. Check focus, stabilizer. Take a couple of test shots using printed targets or other subjects. After shooting, connect the camera to your laptop and view the captured images in detail. Check the sharpness settings, change the shooting modes. If you are satisfied with the result, you can purchase the desired lens.

Recommended: