How To Assemble A Phone

Table of contents:

How To Assemble A Phone
How To Assemble A Phone
Anonim

Assembling any phone is carried out in the reverse order of the procedure for disassembling it. Before disassembling your mobile device, read the conditions specified in the warranty card, as well as read the technical documentation for your model.

How to assemble a phone
How to assemble a phone

Necessary

  • - small Phillips screwdriver;
  • - a thin flat screwdriver or a mild knife.

Instructions

Step 1

Prepare your work surface in such a way that it is convenient for you to disassemble the phone without losing its small parts, as well as not to damage the internal devices. Choose a screwdriver that is the right size for the screws on your phone, because if it is larger than the bolt connectors on your phone, you can damage the fasteners and then need to change them.

Step 2

If you have a camera with a video recording function, record the disassembly process so that you do not forget the sequence later. If you do not have this opportunity, just write down the process step by step on paper and sketch the device connection diagrams, if necessary.

Step 3

Switch off your phone, open the battery cover and remove the battery. Take out the SIM card and removable storage. Unscrew all the screws from the back of the phone, note that in some models they may be hidden under special service stickers. After that, carefully pry off a part of the case of your mobile device using a flat screwdriver or a non-sharp knife, or best of all, use a plastic card.

Step 4

If necessary, carefully detach the camera from the back of the case. After removing the phone case, carefully examine its contents. Unscrew the microcircuit, disconnect the phone keypad, do not forget about the side buttons for locking the device and adjusting the sound level. Remove the keyboard buttons by pushing them in from the outside.

Step 5

Reassemble your mobile device in reverse order, paying attention to the size of the screws and the threads of the housing. Be sure to secure the screws on the internal devices of the phone to prevent them from breaking the next time you drop your phone. Insert the SIM card, replace the removable storage and battery. Close the phone cover and test its operation.

Recommended: