A car device - a navigator will be useful to any driver. It will help you determine the most convenient route during your trip. In addition, the navigator will suggest the safest route. It is installed quite simply. No special skills are required for this.
Instructions
Step 1
At the moment, there are many navigators, each of which is an automated device for determining the location. Navigators, which cost up to $ 200, work only with laptops and PDAs. Connected using a USB cable, Bluetooth and Wi-fi. When connected, the software is loaded onto the navigator, which is located on the disk. Once installed, the navigator can pick up the signal.
Step 2
Devices under $ 500 have an external antenna. Such an antenna picks up the signal from the satellites when the navigator is turned on. The connection to the computer and the installation of the program are carried out in the same way. The antenna must not be obstructed by foreign objects. With the help of such an antenna, you can pick up high-frequency signals that are transmitted via GPS communications.
Step 3
The most expensive navigator models have better software. During software installation, only those programs are selected that are really needed. These navigators mainly include the novelties of 2011, presented at the world exhibition of information technology.
Step 4
A special stand is included with the navigator, which is attached with strong suction cups to any surface in the car interior. You can use the stand in almost any car that allows you to fully work with the navigator.
