Mobile Internet is very popular among residents of Russia and beyond. Access is via the cellular radio interface. Before using the WAN, you must connect and set up your phone.
Instructions
Step 1
Not all Nokia mobile phones support wap or gprs. Therefore, if you are purchasing a communication device, ask your consultant about the capabilities and built-in options of your phone.
Step 2
Internet services are provided to you by the operator you subscribe to. That is why you should check the settings with the cellular company.
Step 3
When activating a SIM card, the settings should come to your mobile in the form of a service message. You just need to save them and make them the default ones. To do this, go to the phone menu. In front of you you will see several tabs, each of which has its own options and its own purpose.
Step 4
To configure the Internet, select the "Options" tab. When you open it, you will see a small list of different functions. Click on the "Phone" option, and then - "Configuration" - "Personal configuration".
Step 5
After that, create an access point. Enter its name - it depends on the cellular operator. For example, if you are a subscriber of Megafon OJSC, indicate the name of the point - internet.
Step 6
Enter a name for the setting; it must match the name of the company. For example, subscribers of Megafon OJSC must set the name Megafon Internet. Enter the address of the home page, for example,
Step 7
In addition to these settings, you must activate the "Mobile Internet" service, for which contact your operator or use the self-service system, which you can find on the official website of your mobile operator.
Step 8
Some Nokia models do not have the "Configuration" option, but there is a so-called WLAN option. To configure it, go to the phone menu, select "Options" - "Communication" - "Options" - "Destinations". A list of Internet settings will open in front of you. Add a new point by selecting the Access Point option. The next item - Internet”- contains all possible connections. You can also configure wap by selecting the third item from the top.
