When installing a satellite dish on your own, you must take into account its direction in order to tune the reception of channels from a specific satellite. Each has its own angle of installation.
Necessary
- - satellite antenna;
- - receiver.
Instructions
Step 1
Mount the satellite antenna kit prior to installation, remove the top insulation of the cable, place a braided shield around it. Then place the foil along it. Peel off the inner insulation layer 10 millimeters. Screw on the connector until it stops and bite off the center conductor so that it does not protrude more than two millimeters from the connector.
Step 4
Set up the antenna with a digital receiver. To do this, fix the plate in the direction of the sun at noon. Do not fully tighten the nuts. There should be no objects (buildings, trees) in the selected direction. Connect a cable from the center terminal of the switch to the terminal on the receiver.
Step 5
Connect the cable of the left head ("Astra") to the first terminal of the switch. Turn on the receiver, select a channel, achieve the maximum signal quality. Rotate the antenna slowly to find the best position. Then tighten the nuts completely.
