How To Clean The Print Head Of A Printer

Table of contents:

How To Clean The Print Head Of A Printer
How To Clean The Print Head Of A Printer

Video: How To Clean The Print Head Of A Printer

Video: How To Clean The Print Head Of A Printer
Video: How to clean clogged or blocked Epson print head nozzles the easy way. 2024, November
Anonim

Many have faced a common problem with inkjet printers - if the printer is not used for its intended purpose for a while, its printheads dry up. For most people, this means a complete malfunction of the printer, so they have to get rid of it. However, clogged printheads are not really an irreversible problem and can be cleaned.

How to clean the print head of a printer
How to clean the print head of a printer

Instructions

Step 1

Prepare sterile medical cotton wool, glass cleaner with ammonia, distilled water, a plastic container with a lid and two small syringes with needles, and a pack of paper towels for cleaning the printheads.

Step 2

Take a napkin and place the print head that you removed from the printer with the nozzles down on it. There will be ink marks on the napkin - keep changing the napkin until the head leaves marks on it.

Step 3

Now soak a paper towel with glass cleaner and wipe the surface of the print head with it, without touching the electrical board and the head-to-cartridge junction. Flush the head inlets by drawing cleaner into a syringe.

Step 4

Once all traces of ink have been completely removed, line the fittings with sterile cotton wool and a generous amount of glass cleaner. Place the head with cotton wool in a plastic tub, pour the cleaning liquid on the bottom and seal the container with a lid or bag. Wait a day and then change the solution.

Step 5

Repeat the procedure for two to three days, then remove the head from the solution and blot with a napkin its remnants in the intakes.

Step 6

After the ink marks are no longer printed on the napkin, rinse the head with distilled water. Blot the head again with napkins and dry with a hair dryer at a great distance for half an hour. Install the head into the printer and install a new cartridge.

Recommended: