In the event of external defects of mobile phones with their full serviceability, you can use special replaceable panels that are available for almost every device model.
Necessary
- - small Phillips screwdriver;
- - flat knife;
- - replaceable panel.
Instructions
Step 1
Purchase a replacement cover for your phone model. They can be purchased at the points of sale of mobile phones in your city or ordered in the online store (the latter have a large selection). Find a Phillips screwdriver that fits the threads in your phone's screws. If you use a larger screwdriver, you can simply ruin the fasteners, and in the future you will have to order new ones, since the case will not hold reliably without them.
Step 2
Turn off your phone and remove the battery cover. Remove the battery if there are any mounts on your mobile device underneath. Unscrew any bolts you can see and set them aside so as not to lose. Pry off the cover of the phone with a mild table knife and snap off the special plastic fasteners.
Step 3
If you still need the panel, be careful as you can damage the plastic. Be extremely careful with the connected devices inside the phone, especially with regard to the shield connection cables.
Step 4
Remove the front part of the case, remove the keyboard from it if you need it (some replacement panels are supplied with the keyboard buttons). Take out the new panel, insert the keyboard buttons into its front side. Install and secure the position of the microcircuit and the screen. Be sure to tighten the phone components tightly, otherwise they may be damaged if dropped.
Step 5
Connect the parts of the body of your phone, if necessary, slightly press them along the perimeter of the removable panel until it clicks. Install and secure the screws holding the case. If your phone model provides for a different type of form factor than a candy bar, disassemble for each of the constituent parts separately, without disturbing the overall design.
