The receiver is configured using the remote control. After turning on the device, it is necessary to select the desired menu items and set the program parameters. Basically, the provisions for all cable receivers are similar, the nuances can be read in the technical manual for the model that you purchased.
Necessary
Receiver, remote control
Instructions
Step 1
Turn on the receiver and find the Menu button on the remote control. Click this button. A list of items will appear. Enter the "Installation" item and click OK.
Step 2
After that enter the submenu item "Factory settings" and click OK. The question "Reset data?" Will appear on the screen. It should be answered positively. The receiver will be reset and returned to factory settings. Then turn off the receiver. During shutdown, all previously made settings will be completely erased.
Step 3
Turn on the receiver again. A menu in English will appear. Select System setting from the menu and press OK. In the list that appears, find the Language setting and click OK. For all submenus, select Russian by moving the arrows on the remote control.
Step 4
After setting the language, press the Exit button on the remote control once. Enter the "Installation" menu and confirm with OK. A submenu list will appear, select “Search for channels” and press OK. Set “Search Mode” to Auto. Using the numeric keys and arrows on the remote, set the following parameters: bit rate - 6375, QAM type - 64, start frequency - 298000, end frequency - 466000, free or encrypted, or only free. Click "Start Search" and confirm with OK. Wait for the program scan to finish.
Step 5
After scanning, a window will appear. Press OK once. The found channels will be saved and the program will move you to the previous submenu. Search Mode should be set to Auto again. Move the arrows on the remote control to the item "QAM Type" and change 64 to 128. Return to the item "Start Search" and press OK. Wait for the end of the scanning session again.
Step 6
After the window reappears, click OK and then Exit. All channels that have been found are stored in the device's memory.
