Phone chargers fail quite often. Most often, the wire is damaged. Although these devices are inexpensive, it still happens that there is no suitable one at hand, and the phone urgently needs to be charged. In this case, you can use alternative methods of charging your mobile phone.
Instructions
Step 1
If you or your relatives also have mobile phones from the same manufacturer as yours, you can borrow a charger from them for a while - most likely it will work. In addition, although it is rare, it happens that a mobile phone from one manufacturer can be charged with a charger for a phone of a completely different brand.
Step 2
The second way is using a computer. If your phone is equipped with a USB port and you have a USB cable for it, just use this cable to connect your mobile phone to your computer.
Step 3
If you don't have a computer or USB-cable, this is not a reason for sadness. You will need to remove the battery from the phone, as well as find a faulty or simply unsuitable charger for your device.
Step 4
Cut off the part of the charger that connects to the mobile phone - you don't need it. Next, run a knife along the wire to cut the insulation, then pull it down, exposing two wires.
Step 5
Looking at the phone battery, you will see golden contacts, plus signs “+” and “-”. Connect the blue wires to the plus, and red to the minus, respectively.
Step 6
Then the wiring must be fixed. This can be done with scotch tape. Wrap them around the wires so that you do not have to hold them during the entire process of charging the battery. Plug in the charger and charging will start.
