The GPS navigator is a good travel companion. It not only shows, but also prompts the route, according to the points set by the user from the beginning to the end of the path, and also determines when and where to make a turn. Most models of GPS navigators are able not only to show the direction of movement, but to plot a route, as well as save it if necessary.
Instructions
Step 1
The "Route" function gives you the ability to sequentially link waypoints and move from one to another, to the final destination. When a route consists of three waypoints A, B, and C, the segments A to B and B to C are referred to as the “two leg” sections of the route. Your driving route can contain up to 50 waypoints stored in memory.
Step 2
Route creation and modification is performed by editing the waypoints template. If you need to change an existing and previously saved route, go to the "Routes" section. On this page, you will see a list of your routes.
Step 3
Select the route you want to change using the Up or Down buttons. Then press "Enter" and in the menu that opens, select "Change" and press "Enter" again.
Step 4
Here you will see all the points included in the route. Press "Enter" and in the opened submenu you will be offered four actions: "Add", "Insert", "Delete" and "Save". Make the changes as you would when creating a new route.
Step 5
That is, if you want to add a point to make the route longer, select the "Add" item. Press Enter and a list of waypoints will open. Select the waypoint you want to add using the Up or Down buttons. Confirm the action by pressing "Enter".
Step 6
You can also change your route by inserting a waypoint. To do this, select the "Insert" item. Enter the waypoint list by pressing Enter. Select the waypoint you want to insert using the Up or Down buttons. Confirm the action by pressing "Enter".
Removing a waypoint from a route is similar. Select the point to delete and press Enter.
Step 7
Remember to save any changes you make. To do this, select the "Save" item using the "Up" or "Down" buttons. Press Enter again to check the name of the route. Select "Ok" if you want to save it with the same name. You can also give the route a new name. To do this, after clicking on "Enter" in the window that appears, specify a name.
