Most of the phonograms that can be found on the Internet were originally songs from which the voice was simply cut. This is what explains not always the good quality of the phonogram. In order not to look for a minus on the network, you can perform the operation to remove the voice yourself, knowing a few simple things and at least one audio editor.
Necessary
audio editor
Instructions
Step 1
Download and install an audio editor if you haven't met them before. Adobe editors are the easiest to work with. For example, Audition or a simplified version of the same Soundboth program. If you like another program according to the description on the Internet, you can use it. You just need to make sure that her tools are sufficient for the next operations.
Step 2
Cut out the frequency range that the human voice is in. This method is the most common, but at the same time it is very flawed. The range of the human voice is so wide that when it is completely removed, part of the musical accompaniment is cut out. These can be either individual notes in the playing of the instrument, or the entire instrument as a whole.
Step 3
If the artist has a large number of sibilants and sibilants, then the soundtrack will become even poorer when these sounds are removed. As a result, a common rhythm will remain from the music. Despite this, the method is easy, and if the ideal result is not so important to you, and the singer has a good voice, use it.
Step 4
Work with the channels of the track. This is the second way that you can remove the voice. Its essence lies in the fact that the song is almost always recorded in stereo. This means it has two channels. The human voice is recorded in the center of these channels. If you put them on top of each other, then the vocals will drown out itself. This method has its drawbacks. Say goodbye to the bass in the song. Like the voice, the bass guitar and bass drum are also placed in the center, which means they will also disappear. But when it comes to pop music, where these instruments are rarely used, this is not so scary.
Step 5
Do not worry that after mixing the channels, the voice did not disappear. Most likely you did everything right, it was just that the voice had a reverb effect or was layered twice with a slight delay to add additional sonic features to the track. In this case, this method does not work.
Step 6
Try combining the first and second method. It is good because, most likely, you will completely get rid of the voice, but also prepare for the fact that the problems of both methods can come out.
