Modern devices have fairly large, touch-sensitive displays, which are the most fragile and scratch-prone part of the device. To protect the screen from damage, a protective film is installed, which will protect the screen from various types of damage and help to extend the life of the device.
Necessary
- - napkin or nap cloth;
- - means for cleaning the touch screen;
- - plastic card.
Instructions
Step 1
Before applying the film, you will need to thoroughly clean the screen from all kinds of dirt that can cause bubbles. Even fingerprints on the screen can cause blistering on the film, and therefore it is necessary to degrease the surface first. To do this, use the special napkin that comes with the film. If necessary, you can use a lint cloth and a special touch screen cleaner.
Step 2
Remove the film from the package. Peel off the special paper tab to remove the protective part. Place a corner of the film against the glass of your device and continue pulling on the petal as you gradually apply the film to your phone screen. Peel off the protective layer completely and stick the film to the screen of the device.
Step 3
In the event that the product is uneven, you can lift it up a little and glue it again in order to align the desired areas. Remember that you should never touch the adhesive side of the film, otherwise marks will remain on it.
Step 4
Take any plastic card and use its edge to smooth bubbles over the entire surface of the display. Swipe the card across areas of the phone screen. Continue the operation until all the bumps on the surface have been removed. Then you can gently peel off the top protective layer with a paper petal. The film application procedure is complete.
